Many customers think that the operating power supply of the hydraulic lifting platform is below the safe voltage of V， and there will be no electric shock. They are wrong. Normally， there will be no electric shock， but if there is improper operation， it will still be very dangerous. So how can we effectively prevent the occurrence of electric shock accidents? Today， and if there is dirt， it must be washed off with gasoline or thinner.
BotanzaManual hydraulic lifting platform application manual hydraulic platform performance: manual hydraulic platform vehicle is made of high-strength steel， the design structure is reasonable and compact， safe， stable and reliable， built-in safety valve， fully sealed oil cylinder， manual hydraulic system lifting easy to operate. Equipped with guide wheels to save the operator"s physical strength， and can protect the load wheels and pallet load wheels. Unique hydraulic pump design， the pump is simple and designed to maintain an ideal height for assembly line loading and unloading operations; coupled with the unique design concept， the operator"s operation is simple and convenient.
Whether it is used outdoors or indoors， some small problems will inevitably appear after a long period of time. At this time， what we should do is to maintain and maintain the elevator. How to follow the steps correctly It has become a difficult problem， and I will answer it with you.
Los AngelesThe daily maintenance of the hydraulic lifting platform in normal use is essential， but even if there is normal maintenance on the equipment， any possible problem cannot be ignored， so in order to ensure that the process of using the hydraulic lifting platform for each operation What aspects do we need to check before operation? Today， the editor will give you a popular science.
Pay attention to check whether there are any broken wires and loose strands in the wire ropes of each part. If it exceeds the relevant regulations， it must be replaced immediately. The maintenance of the wire rope should be strictly in accordance with regulations.
In addition to the fixed mode， the elevator also has a vehicle-mounted mobile type. As the name implies， it combines the lifting equipment with the vehicle-mounted system. Such a lifting equipment is very flexible to move and of course it is more useful. For example There is this kind of lifting equipment in the airport， and it can be used wherever lifting operations are required. It can be used. For example the scope of operation is not limited to a certain place， when installing outdoor advertisements the height of some advertisements is relatively high. At this time， mobile lifting equipment can be used to send billboards or staff to the designated height to work. This kind of equipment can also be divided into two types according to the driving mode: hydraulic lifting and electric lifting. The so-called hydraulic lifting is driven by hydraulic oil to reach a specified height. The electric mode is driven by a motor or geared to lift to A certain height， but at present， hydraulic lifting platforms are more widely used.
Avoid working in an environment. In the event of rain， snow and other weather， the use of the hydraulic lifting platform should be stopped to prevent the occurrence of a short circuit， resulting in electric leakage and electric shock; non-professionals are strictly prohibited from disassembling electrical appliances such as hydraulic lifting platforms. In the event of an accident， inform the phenomenon of the accident， and the manufacturer will guide you to complete the inspection or send someone to repair it; do not disassemble the appliance without permission! Professional elevator factory guarantees quality， guarantees service. Guarantees quality. Your satisfaction is our pursuit! Welcome to inquire.
Loose fixing screws of the motor: The motor fan itself makes a sound when it turns. If the screws fixing the motor are loose coupled with its own vibration， the motor collides with other parts in a way， so it makes a sound; the joints of the pin shafts are dry， lack of oil， iron The rigid friction between the parts and the iron parts will not only damage the parts but also produce abnormal noises， so I still want to emphasize again， pay attention to timely maintenance and frequent refueling; if the hydraulic lifting platform does not rise， there is air in the hydraulic oil， you can open it to exhaust If the hydraulic oil is solidified: just replace the hydraulic oil; oil leakage: check whether there is oil leakage at the joints of each oil pipe， replace it in time; reverse the motor: check whether the wiring is wrong; (no Those who understand electricity， timely manufacturers of hydraulic lifting platforms)
The elevator is a kind of elevator equipment composed of traveling mechanism， electric mechanism and supporting mechanism. The hydraulic oil is under a certain pressure formed by the vane pump， and enters the lower end of the hydraulic cylinder through the oil filter， explosion-proof electromagnetic reversing valve， throttle valve， hydraulic control check valve， and balance valve， so that the upward movement of the hydraulic cylinder can lift heavy objects ， The oil returned from the upper end of the hydraulic cylinder returns to the oil tank through the explosion-proof electromagnetic reversing valve， and the rated pressure relief valve is adjusted， and the pressure gauge reads the pressure gauge.
Interpretation and observationNaturally connect the motor to the lift. When connecting， it must be ensured that the concentricity of the output shaft of the elevator is consistent with that of the input shaft of the motor， and that the outer flanges of the two are parallel. If the concentricity is inconsistent， it will cause the motor shaft to break or the elevator gear to wear.
Nowadays， small and medium-sized enterprises are holding products with the idea of good quality and favorable price.
Secondly， there must be no dirt on the friction surface. If there is dirt， it needs to be washed off with gasoline or thinner; the gear box， gearbox，BotanzaA cargo elevator， external gear and other parts of the equipment and the hydraulic oil must be in accordance with the requirements in the table; Correctly maintain the hydraulic guide rail lift. Regularly check whether the wire ropes in each part are broken or loose. If this phenomenon is found， replace them in time. If there is any looseness， it should be tightened in time. The connecting bolts of the equipment should be checked for tightness when the body is under pressure. All connecting shafts should be equipped with cotter pins; check whether each mechanism is operating normally， whether there is noise or failure ， to eliminate all faults in a timely manner; when installing， dismantling and adjusting the slewing mechanism of the equipment， it is necessary to pay attention to the parallelism between the reducer and the center line of the gear， and the appropriate meshing gap; conduct a comprehensive inspection of the equipment regularly， whether the wires and cables are If there is damage， whether the motor is overheated， replace it in time and continue to run after troubleshooting; ensure that the bearings of the motor， each box distribution box and brushes must be kept clean， and the travel switch points of each safety device must be safe and reliable.
Regarding the cleanliness of the hydraulic station， is there any relevant rule requirement?
qualityThe water cooling of the hydraulic station is generally tube-type water cooling， and its type selection is based on the heat load to calculate the heat exchange area， while its air-cooled elevator is carried out by using an air cooler， and it is The heat transfer capacity is calculated according to the heat load， and then the type selection calculation is carried out under the condition that the flow rate can be satisfied. Therefore， these two kinds of cooling are not the same， and there is a big difference. Long-term promotion of freight elevator factories and other， mutual benefit and win-win. If you choose the wrong supplier， you will be overwhelmed with all kinds of after-sales troubles in the later stage. Recently， I have seen many netizens report the problem of very loud oil cylinders. Today， the editor will simply popularize the knowledge for everyone.
For the safety performance of aerial work platforms， it is necessary to have production technology， scientific technology， and strict management to ensure production. When in use，BotanzaFixed guide rail lifting cargo elevator， people， the environment， and machines are the three major links of high-altitude operations. Safety is the basic condition to ensure the smooth progress of high-altitude operations. In the following， Jiuyi will briefly describe the precautions for using aerial work platforms as follows: Personnel working at heights A health certificate is required. People with heart disease， high blood pressure， and mental illness are not allowed to work at heights. Workers are not allowed to work at heights when they are drinking or are in a low state of mind.
Walking: assisted self-propelled， self-driving， and car modified.
BotanzaLow cost: The cost is much lower than that of the scissor-type mobile lifting platform， so when purchasing a lifting platform， you must consider the scope of use of the lifting platform， the frequency of work the load and other factors to choose a lifting platform that suits the work requirements .
The motor connection is wrong. When the delta connection motor is wrongly connected into a star shape， the motor still runs with full load， and the current flowing through the stator winding will exceed the rated current， and even cause the motor to stop by itself. If it overheats， it will burn out. When the star-connected motor is wrongly connected into a triangle， or the motor with several coil groups connected in series to form a branch circuit is connected in parallel with two branches， it will cause the winding and core to overheat， and in severe cases，BotanzaOutdoor lifting cargo elevator， the winding will be burned.
Guide rail lift (also known as freight elevator) is a non-scissor hydraulic lifting platform， which is mainly used in industrial plants， restaurants， restaurants， warehouses， docks， workshops and other places that need to move goods vertically between high-rise buildings above the second floor. The low height is especially suitable for sites where the site is not suitable for digging pits. What problems do we need to pay attention to in these places where elevators are used?