It is strictly forbidden for personnel to take the freight elevator to go up and down floors and climb.
If the motor of the hydraulic lift is overheated， stop the machine in time and continue running after troubleshooting. The motor bearings must be in good condition.
KoboshburgWhen using mobile lifts for high-altitude operations， the safety requirements and specifications of the project site must be complied with.Before wearing the helmet， check whether the helmet shell， hat lining， and chinstrap are complete and safe and effective.
Before using the aerial work platform， it is necessary to confirm whether the outriggers are well supported， refer to the level beads on the equipment to judge and debug， and then proceed with the operation; the rollers and slideways confirm whether the roller slideways of the hydraulic lifting platform are dry，KoboshburgOutdoor cargo elevator， and if there is When drying the site， an appropriate amount of butter should be added to ensure the smoothness during operation and to avoid head-to-head wear between mechanical parts.
HyderabadIt is strictly forbidden to switch the electric control switch with wet hands. Many people tend to ignore this detail. Although the safety voltage of the hydraulic lifting platform is below V， if you touch the power supply with your hands， it may cause lifting failure in light cases， or electric shock accidents in severe cases.
Safety performance: The lifting structure is made of high-strength manganese steel rectangular tube， and the scissor-type mechanical mechanism is easy to maintain， with strong stability and high carrying capacity. The maximum lifting height is about meters， and the maximum load is about tons. .
After the goods are transported clean up the debris on the platform.
The wrong connection of the motor of the elevator When a coil， coil group or one-phase winding is reversed， it will cause a serious imbalance in the three-phase current and cause the winding to overheat.
Use of manual hydraulic platform: The manual hydraulic handling platform is novel in design， reasonable in mechanism and easy to use. It is suitable for loading， unloading handling and stacking of barrels in factories， workshops， warehouses and oil depots. It is especially suitable for dumping or batching in chemical and food workshops. It can also load and unload heavy objects into trucks and stack them，KoboshburgChain guide rail type cargo elevator， and cooperate with hydraulic drum trucks to operate， which can greatly improve work efficiency and reduce labor intensity. It can also be refitted for use. It is a new ideal multi-purpose lifting and unloading machinery for loading and unloading and lifting heavy objects.
What is the new price of fixed lifts? Fixed lifts are currently very popular in the market. Due to different manufacturers， and different brand awareness， height of meters， table size mm *mm， the price is about - yuan; the rated load is - tons， the height is meters， the table size is mm*mm， the price is about yuan. Rated load lift height， table size of each fixed liftDifferent. (Specific bearing capacity and rising height can be customized according to user requirements)
quality standardRegular maintenance Regularly check whether the circuit system of the hydraulic lifting platform is loose， and check whether the wires and cables are aging and damaged， which may cause leakage of the line. If there is， it should be repaired in time to avoid electric shock.
The last thing to note is that， compared with the lifting platforms in some places， protective fences are generally added on the platforms. Since the lifting platforms are special equipment， the National Quality Inspection Bureau is very strict on this piece of inspection. All must be dismantled，KoboshburgFixed guide rail lifting cargo elevator， so when the personnel ask you if you want to add a guardrail， don"t blindly refuse， and consider whether it is necessary according to the site of use. In addition， you must have the "People"s Republic of Special Equipment Manufacturing License" and the "People"s Republic of Special Equipment Installation， Transformation and Maintenance License" to produce， install and maintain. Therefore， you must ask whether the manufacturer has these two certificates.
Fixed lift is a kind of transportation equipment that directly lifts and unloads goods from the ground. It is mostly used in places such as goods transportation between height differences in production lines， materials on and off the assembly line， parts lifting during large-scale equipment assembly， and fixed three-dimensional parking. So what is the new price of the fixed lift?
Features of hydraulic lifts: According to the working mode， hydraulic lifting platform products are divided into crank arm hydraulic lifting machines， scissor hydraulic lifting machines， mast type hydraulic lifts and straight arm hydraulic lifting machines. The hydraulic lift is a replacement product of the folding arm lift (lifting platform) and the scissor lift (lifting platform). It can be widely used in stations， docks， airports， post and telecommunications， municipal gardens， garages， public building facade decoration， decoration or installation and maintenance of power systems， etc. The lift has the advantages of light weight， self-propelled， electric start， simple operation， large working area， especially the ability to cross obstacles for high-altitude operations and the like.
originalIn addition to the fixed mode， the elevator also has a vehicle-mounted mobile type. As the name implies， it combines the lifting equipment with the vehicle-mounted system. Such a lifting equipment is very flexible to move， and of course it is more useful. For example There is this kind of lifting equipment in the airport， and it is also possible to install this kind of equipment in stations or stadiums. Since it can be moved， the scope of operation is not limited to a certain place， and it can be used wherever lifting operations are required. It can be used. For example， when installing outdoor advertisements the height of some advertisements is relatively high. At this time， mobile lifting equipment can be used to send billboards or staff to the designated height to work. This kind of equipment can also be divided into two types according to the driving mode: hydraulic lifting and electric lifting. The so-called hydraulic lifting is driven by hydraulic oil to reach a specified height. The electric mode is driven by a motor or geared to lift to A certain height， but at present， hydraulic lifting platforms are more widely used.
Any product always has a running-in period when it is used for the first time， so what should we pay attention to during the running-in period of using the hydraulic lifting platform? Today， the editor will share this topic with you.
Pay attention to check whether there are any broken wires and loose strands in the wire ropes of each part. If it exceeds the relevant regulations， it must be replaced immediately. The maintenance of the wire rope should be strictly in accordance with regulations.
KoboshburgPrecautions for elevator installation Keep the access road of the external construction elevator smooth and have enough parking space for equipment. When it is necessary to use a steam crane for auxiliary installation， it should be fully considered whether the site environment meets the operating conditions of the steam crane.
If the motor of the hydraulic lift is overheated， stop the machine in time and continue running after troubleshooting. The motor bearings must be in good condition.
Features of hydraulic lifts: According to the working mode， hydraulic lifting platform products are divided into crank arm hydraulic lifting machines， scissor hydraulic lifting machines， mast type hydraulic lifts， and straight arm hydraulic lifting machines. The hydraulic lift is a replacement product of the folding arm lift (lifting platform) and the scissor lift (lifting platform). It can be widely used in stations， docks， airports， hotels， post and telecommunications， municipal gardens， garages， cleaning companies， public building facade decoration， decoration or installation and maintenance of power systems， etc. The lift has the advantages of light weight， self-propelled， electric start， self-supporting legs， simple operation， large working area， especially the ability to cross obstacles for high-altitude operations and the like.