Whether it is used outdoors or indoors， some small problems will inevitably appear after a long period of time. At this time， what we should do is to maintain and maintain the elevator. How to follow the steps correctly It has become a difficult problem， and I will answer it with you.
Prepare the foundation according to the foundation plan， pay attention to the alignment， leveling， and alignment to ensure the level of the foundation and various requirements for use.
Inov botswanavThe second is that steel will have obvious effects of thermal expansion and cold contraction at low temperatures. Although this property of steel will be taken into account when designing and manufacturing hydraulic lifts， after all， the environment is different. Under low conditions， steel will appear. Some unstable performances，Inov botswanavSmall lifting cargo elevator， such as increased hardness， decreased toughness， etc. At this time， it is necessary to pay more attention to the maintenance of equipment to keep the key parts in order to avoid dry grinding.
How to effectively prevent electric shock by using a hydraulic lifting platform It is very common to add a leakage protector， and the cost is not high. It is both affordable and safe， and can effectively prevent electric shock.
BresciaThe boxes and distribution boxes of the hydraulic lift are always kept clean， and the dust on the electrical equipment is cleaned in time.
Secondly， there must be no dirt on the friction surface. If there is dirt， it needs to be washed off with gasoline or thinner; the gear box， gearbox， external gear and other parts of the equipment and the hydraulic oil must be in accordance with the requirements in the table; Correctly maintain the hydraulic guide rail lift. Regularly check whether the wire ropes in each part are broken or loose. If this phenomenon is found replace them in time. If there is any looseness， it should be tightened in time. The connecting bolts of the equipment should be checked for tightness when the body is under pressure. All connecting shafts should be equipped with cotter pins; check whether each mechanism is operating normally， whether there is noise or failure ， to eliminate all faults in a timely manner; when installing， dismantling and adjusting the slewing mechanism of the equipment， it is necessary to pay attention to the parallelism between the reducer and the center line of the gear， and the appropriate meshing gap; conduct a comprehensive inspection of the equipment regularly， whether the wires and cables are If there is damage， whether the motor is overheated， replace it in time and continue to run after troubleshooting; ensure that the bearings of the motor， each box， distribution box and brushes must be kept clean， and the travel switch points of each safety device must be safe and reliable.
Frequently check whether the various mechanisms are operating normally and whether there is any noise. If a fault is found it must be eliminated in time.
The last thing to note is that， the National Quality Inspection Bureau is very strict on this piece of inspection. All must be dismantled， so when the personnel ask you if you want to add a guardrail， don"t blindly refuse， and consider whether it is necessary according to the site of use. In addition， you must have the "People"s Republic of Special Equipment Manufacturing License" and the "People"s Republic of Special Equipment Installation， Transformation and Maintenance License" to produce， install， and maintain. Therefore， you must ask whether the manufacturer has these two certificates.
Improper use of oil: Inadequate maintenance of mobile lifts and other high-altitude work platform equipment will cause the fitting clearance of parts to be small， and the oil is not easy to form a uniform oil film on the friction surface. In addition， due to assembly and other reasons， it is difficult to ensure the uniformity of the fitting clearance. Thereby reducing the efficiency and causing early abnormal wear of equipment parts; in severe cases it will cause scratches or bites on the precisely matched friction surfaces， resulting in abnormal noise of the equipment.
Always check the connections of the various parts of the hydraulic lift， and tighten them if they are loose. The tightness of the connecting bolts of the body should be checked when the body is under pressure.
Interpretation and observationThe use of elevators is not to maintain and overhaul after the equipment fails. It is necessary to maintain the equipment according to the correct maintenance and overhaul and start with the preparation work to prevent all possible failures and accidents. I hope that the editor can summarize the knowledge points today. Help everyone.
What types of lifts are there? There are many types of this equipment， for example， it can be divided into fixed lifting devices and vehicle-mounted lifting devices according to the form of movement. The so-called fixed lifting means that it is generally installed in one place and fixed， and then the lifting operation can be carried out. This type of lifting equipment is generally used more on the assembly line. Some large-scale production lines need to move the material when loading materials. Lifting to a certain position， and then putting it into the production line for production， a special lifting device is required to be fixed at a certain position of the production line.
It is strictly forbidden to switch the electric control switch with wet hands. Many people tend to ignore this detail. Although the safety voltage of the hydraulic lifting platform is below V， if you touch the power supply with your hands， it may cause lifting failure in light cases， or electric shock accidents in severe cases.
Outriggers: mechanical outriggers， hydraulic outriggers， ordinary hand-operated outriggers， pull-out outriggers.
Safety and healthThe safety device and application of the guide rail hydraulic lifting platform The use of the guide rail hydraulic lifting platform The guide rail hydraulic lifting platform is a non-scissor hydraulic lifting freight elevator. It is used for goods between different floors of industrial plants restaurants， restaurants， etc. The low height can be made to -mm. The advantage is that it can be placed directly on the ground without digging pits， reducing engineering construction costs， and there is no need to set up hanging points on the top， which is safe. Reliable; the hydraulic lifting platform adopts hydraulic transmission mode， and can be non-calibrated according to customer needsSeveral types: Motor winding open circuit. When one of the motor windings is disconnected， or one of the parallel branches is disconnected，Inov botswanavGuide rail lifting cargo elevator， the three-phase current will be unbalanced and the motor will overheat.
It is necessary to check the brake of the guide rail type elevator frequently， and there should be no dirt on the friction surface.
Use Hydraulic lifts are widely used in various industrial enterprises and production lines such as automobiles， containers， mold manufacturing， wood processing， chemical filling， to meet the lifting needs of different operating heights， and can be equipped with various table forms (such as balls， rollers， Turntable， tilting， telescopic)， with various methods (separate， linkage， explosion-proof)， with the characteristics of stable and accurate lifting， frequent starting， large load capacity， etc.， effectively solving the difficulties of various lifting operations in industrial enterprises， so that Production operations freely. The professional elevator factory has advanced technology， strict testing， more affordable prices， and more discounts are in progress， welcome to consult.
Inov botswanavWhen the freight elevator breaks down， professionals should be invited to repair it， and the freight elevator cannot be altered without authorization.
It is best not to cover the aerial work vehicle and park the vehicle outside. If it is windy and rainy， the clothing will repeatedly slap the car paint， especially if the car blows sand on the clothes， when the wind does not directly spray powder or clean the sand on the mechanism， but it should be washed with water and prevent the sand particles on the paint surface from being scratched by the vacuum cleaner.
The last thing to note is that， compared with the lifting platforms in some places， protective fences are generally added on the platforms. Since the lifting platforms are special equipment， the National Quality Inspection Bureau is very strict on this piece of inspection. All must be dismantled， so when the personnel ask you if you want to add a guardrail， don"t blindly refuse， and consider whether it is necessary according to the site of use. In addition，Inov botswanav8-meter cargo elevator， you must have the "People"s Republic of Special Equipment Manufacturing License" and the "People"s Republic of Special Equipment Installation， install， and maintain. Therefore， you must ask whether the manufacturer has these two certificates.