High lifting height
When the wall bracket cannot meet the requirements of the construction site, using side mounted oil cylinders, stable operation, noise free, easy maintenance and longer service life.
KasetaPlatform.
Drivers of construction electric elevators should hold special construction operations and are not allowed to operate without a certificate.
InnsbruckSafety performance: Electric elevators not only have the safety device of traditional traction elevators, suitable for both indoor and outdoor installation.
The scissor type electric elevator is a widely used high-altitude operation special equipment. Its scissor mechanical structure ensures high stability of the lifting platform, wide working platform, and high bearing capacity, making the high-altitude operation range wider and suitable for multiple people to work simultaneously. It makes high-altitude operation more efficient and safer
Implementing multiple shifts of homework should fill in and submit records according to regulations.
Electric elevators should be regularly maintained and cleaned. During maintenance and cleaning, the bracket should be supported to prevent the electric elevator from overturning. Electrical and hydraulic systems should be maintained by professional personnel; When the battery level display is less than %
Use floor doors and cage door devices on construction sites where conditions permit.
Inspection standardDuring the use period, the user unit should organize professional technical personnel to inspect the construction electric elevator monthly according to the standard requirements, and record the inspection results.
Setting requirements: The anti loosening and anti loosening parts between the connecting parts should comply with the provisions of the user manual and should not be replaced by other objects. For connecting bolts with pre tightening requirements, a torque wrench or special tool should be used to accurately tighten the bolts to the specified torque value according to the specified tightening sequence. When installing standard section connecting bolts, it is advisable to place the screw at the bottom and the nut at the top.
Implementing multiple shifts of homework should fill in and submit records according to regulations.
Then,KasetaBotou, the lifting platform platform platform that carries the load needs to be balanced, and no deviation of one side is allowed. The lifting of goods does not allow people to stand on both sides of the platform,KasetaChamberley, and the lifting of goods should try to maintain a stable and uniform speed.
Latest quotationCivil engineering advantages: The pit depth of the guide rail type lifting platform is generally around -mm, and the top layer is not affected. It can be customized according to the location and environment.
How to determine the sufficient amount of clean oil for the hydraulic station of an electric elevator? Why cannot water be used to flush the hydraulic station of an electric elevator?
Setting requirements: The installation and dismantling workers, electricians, as specified in the above table.
Model Example: Hanging Cage Specification: LABSC/TDx Type I: ~ Type II: ~ Type V: ~ Technical Requirements: The load-bearing capacity of the foundation should be greater than P: P=(hanging cage weight+outer cage weight+total weight of guide rail frame+counterweight+load) x. (kN).