The bearing capacity of the ground under the concrete foundation plate should be greater than .Mpa.
Spiral electric lifting mechanism: With all the functions of a regular lifting platform， the main feature is that the equipment occupies a small foundation pit and has a large stroke. The equipment has a height of only -mm and a travel distance of up to m. It is particularly suitable for buildings with stages built on two or more floors due to space constraints.
SasariWe have all purchased the aluminum alloy electric elevator equipment，SasariDelft， which is compact and easy to carry. Many garden style hotels hospitals， airports， and large parking lots also wear this equipment，
News Abstract: The development of the lifting platform industry will continue to grow in recent years! With the continuous development of electric lifting machinery for high-altitude operations in recent years， the products of electric lifting platform vehicles have been continuously improved， and various new technologies and materials have emerged， making the further development of lifting platform vehicles possible.
MwomeroSetting requirements: Each landing entrance should be equipped with a landing door， which should cover the opening with its full width and should not open towards the lifting passage.
Braking. The brake limit switch for partial motion control of the electric hoist traction machine. Assembly that restricts the operation of the lift car when it is opened to a high or low position; If the limit switch controls the overtravel switch. When the car travels to a high or low position， it will take on the function of raising or lowering. In order to prevent the lift car from crashing or sinking， stage equipment should be dismantled with over travel switches that can cut off power and cannot be automatically reset， and installed in the machine room， rather than in the shaft; A buffer should be installed that can absorb the energy of the moving mechanism and reduce impact.
Setting requirements: The layout and installation of all cables and wiring of electric elevators should be able to prevent mechanical damage.
The distance between the electric hoist and overhead line in Electrical safety construction shall meet the specification requirements， otherwise protective measures shall be taken.
Construction electric elevators must be equipped with lifting cages and reusable buffers，SasariBisegli， and comply with regulatory requirements.
The safety bulletin board for construction electric elevators should be hung at the protective shed of the electric elevator， it can achieve the lifting of a double-layer tabletop. Multiple lifting platforms can be formed as needed， Terrace， Tower，SasariHamburg North， Pavilion; Ideal props.
The net height of the landing door opening should not be less than m， and the difference between the net width and the outlet width of the cage door should not exceed mm. When the floor door is closed， except for the gap between the lower part of the door that should not exceed mm， the size of any through-hole and opening related to the distance between any door and adjacent moving parts， as well as the gap around the door or between parts should comply with the provisions of Table of "Mechanical Safety - Safety Distance to Prevent Upper and Lower Limbs from Touching Dangerous Areas" GB-.
Steel wire ropes， pulleys， and counterweight steel wire ropes shall comply with the following regulations: the characteristics of steel wire ropes shall comply with the requirements of General Purpose Steel Wire Ropes GB/T; Maintenance， wear， deformation， and corrosion of steel wire ropes
Latest quotationTank oil temperature protection: When the oil temperature in the tank exceeds the standard setting value， the oil temperature protection device sends a signal to suspend the use of the elevator. The elevator can only be started when the oil temperature drops
After the limit switch is activated， only professional personnel can restore the movement of the suspension cage; Limit switches and travel switches should not share the same triggering element; Limit switches should be either suspended or
The advantages and disadvantages of several commonly used electric lifting mechanisms are as follows: hydraulic electric lifting mechanisms: using hydraulic technology， smooth lifting and low noise.
SasariSmall safe operation distance: Circuit voltage (kV) of external power lines<~~~ Small safe operation distance (m) Setting requirements: A small safe distance should be maintained between the outer edge of the construction electric elevator and the edge of the external overhead power line.
The distance between the electric hoist and overhead line in Electrical safety construction shall meet the specification requirements， with&quo; Product; In the music and dance theater stage arranged in a zigzag pattern， the lifting platform， side car platform， and rear car turntable perform a rapid transformation of the entire or partial scene. This arrangement allows for rapid switching of three full sets.