Regularly check whether the operation of each mechanism is normal and whether there is any noise. If any faults are found， they must be promptly eliminated.
It is strictly prohibited to damage the elevator. Brake fluid has a damaging effect on the paint film of aluminum alloy elevators. It can quickly dissolve the paint film. Simultaneously. Brake fluid is also harmful to the eyes. It is reminded that if it splashes into the eyes， it must be immediately rinsed with clean water.
YuanbaoAt present， the general elevator is used to transport materials from the external material platform to the inside of the building， while the aluminum alloy elevator has changed to conveying materials from the inside out. The elevator shaft is used as a protective fence， and the elevator shaft wall is used for load-bearing， while the floor slab is used as a material platform. The working and transportation principles have changed， making it more suitable for modern construction requirements.
Double masted aluminum alloy lifting platform: a new generation product of the design， made entirely of high-strength aluminum profiles. Due to the high strength of the profiles， the deflection of the lifting platform is minimal. Adopting a double mast column structure， it has a large load capacity， a large platform area， excellent stability， flexible operation， and convenient implementation. Its appearance allows for high lifting capacity in extremely small spaces. This elevator is widely used for three masted aluminum alloy lifting platforms: three sets of masts support the operation platform for synchronous lifting， and the support structure is the same as a single masted platform， with super large load capacity and work stability. The overall lifting guardrail device has good strength and greatly reduces the height of the entire machine during transportation. It is very convenient for loading and unloading， and can be assembled or disassembled in one lift. The elevator has a strong load-bearing capacity and is suitable for two people (who can carry a certain amount of weight tools and materials) to climb high at the same time; Various non-standard products can also be customized according to different environments to meet different needs.
KisoroFirstly， the maintenance process should be carried out on the premise of ensuring the safety of staff. Before repairing the aluminum alloy elevator， the power must be disconnected， and the power must be verified and hung up; No power transmission， it is not allowed to disconnect the grounding wire of the aluminum alloy elevator. If it is necessary for maintenance work， after the maintenance is completed， the grounding wire must be connected before the power test can be conducted. When replacing spare parts for aluminum alloy elevators， it is necessary to ensure that the spare parts are intact and of the same model. Items such as valves and seals should be placed in dry and dust-free packaging. When hydraulic aluminum alloy elevator maintenance requires entering the platform for internal work， after the aluminum alloy elevator is lifted， the working surface of the aluminum alloy elevator must be fixed or supported firmly with a crane or other equipment，
An aluminum alloy elevator equipment consisting of a walking mechanism， hydraulic mechanism， electric mechanism， and support mechanism. The hydraulic oil forms a certain pressure by the vane pump， and enters the lower end of the hydraulic cylinder through an oil filter， explosion-proof electromagnetic directional valve， throttle valve， and balance valve causing the hydraulic cylinder to move upwards and lift heavy objects. The return oil at the upper end of the hydraulic cylinder returns to the oil tank through the explosion-proof electromagnetic directional valve， and its rated pressure overflow valve is adjusted. The pressure gauge observes the reading value on the pressure gauge.
Hydraulic aluminum alloy elevators not only play an important role in production， but also have a very important and widespread application in our daily lives. We all know that cleanliness and comfort are essential in public leisure and entertainment venues such as hotels guesthouses， cinemas etc. Cleaning， lamp maintenance，YuanbaoLifting aluminum alloy ladder， and equipment debugging， installation， and maintenance of aluminum alloy elevators are all very important here.
When installing， disassembling， and adjusting the rotating mechanism， it is important to ensure that the centerline of the reducer of the rotating mechanism is parallel to the centerline of the gear， and its meshing surface is not less than %. The meshing clearance should be suitable.
We can create familiar transportation conditions for various mechanical products and engineering goods. Aluminum alloy elevators provide us with direct up and down transportation conditions， as well as safety for high-altitude operations. They have lifting platforms and semi enclosed or fully enclosed products， and provide us with different operating methods. The entire aluminum alloy elevator lifting platform can bring us gravity loads， and create a hydraulic aluminum alloy elevator with different power sources， with steel guide rails installed on both sides of the interior. . The driving part is equipped with a hydraulic drive motor， oil pump， and safety valve， A small oil tank for hydraulic components such as speed control valves and directional valves: . The oil cylinder part: It is composed of one or more oil cylinders of the lifting oil cylinder straight top platform or lifting shear fork frame: . The door system part: It is a closed or mesh platform door or landing door system composed of steel structure， with manual and automatic doors. Generally， open platforms do not have doors. . The electrical part: It includes power， signal， Composition of safety and lighting devices: Platform parts: It is a steel structure platform that carries heavy objects， which can be closed (i.e. cabin type) or open， with guide rollers or guide shoes installed on both sides. The bottom of the platform can be connected to a lifting oil cylinder or a lifting shear fork shaped steel frame. When we use aluminum alloy elevators， we need to regularly inspect maintain， and maintain them， Can make it work with greater power! For example， the transmission part should have sufficient oil， and vulnerable parts must be regularly inspected， repaired， or replaced. Mechanical bolts， especially parts that frequently vibrate， such as slewing bearings and lifting arm connecting bolts， should be checked for looseness. If there is looseness， it must be tightened or replaced immediately. Next， let"s take a look at the regulations for the maintenance time of aluminum alloy elevators: daily maintenance (carried out per shift).
Design brandPerformance characteristics of Xiangte aluminum alloy elevator: The hydraulic system of aluminum alloy elevator products is generally equipped with safety protection devices such as anti fall， overload， and power outage. The entrance and exit of the table are equipped with hanging chains or crossbars， guardrails， and warning lights or bells for the operation of the lifting platform， as well as safety switches that close the lifting platform circuit when the door is open. Extremely generous， operators can operate in multiple layers， jog or safe mode.
Problem: The power indicator light of the aluminum alloy elevator is not on， and the lifting does not operate. Method: Check whether the power cord is correctly connected to the power socket; Check whether the circuit breaker switch is closed and whether the leakage protection switch is tripped.
On the friction surface， there should be no dirt present， and any dirt must be washed off with gasoline or thinner.
The classification characteristics of aluminum alloy elevators include various types of aluminum alloy elevators， including single masted aluminum alloy elevators， double masted aluminum alloy elevators， three masted aluminum alloy elevators， four masted aluminum alloy elevators， and six masted aluminum alloy elevators. The product has stable performance， exquisite and beautiful appearance， excellent quality， and is widely sold domestically and internationally. It is our company"s best-selling flagship product. Below， we will introduce the characteristics of various types of elevators: single mast aluminum alloy elevators: This series of high-altitude work platforms use high-quality high-strength aluminum profiles for lifting structures， which have the advantages of beautiful appearance， small size， light weight， balanced lifting safety and reliability， and are widely used in factories， hotels， restaurants， stations， etc Airports， theaters， exhibition halls， painting， decoration， replacement of lighting fixtures， and electrical cleaning and maintenance. The height of this series of high-altitude work platforms includes a range of - meters， and the overall structure is made of high-strength aluminum profiles. It has a large load capacity， a large platform area， good stability， flexible operation， and convenient implementation. The lifting and lowering uses an external V power supply or optional power， Walking can be manually pushed or equipped with an auxiliary self-propelled device， which is safe， lightweight， and practical to operate. Widely used in buildings， hotels， shopping malls， factories， stations， airports and other places.
Encyclopedic knowledgeWith the continuous increase of our productivity and the continuous improvement of our lives， the demand for aluminum alloy elevators is also increasing. The application of aluminum alloy elevators in every corner of our lives will bring us objective benefits.
Compact in structure， it is a small lifting platform that can enter narrow passages and elevators.
Performance characteristics of Xiangte aluminum alloy elevator: The hydraulic system of aluminum alloy elevator products is generally equipped with safety protection devices such as anti fall， overload， and power outage. The entrance and exit of the table are equipped with hanging chains or crossbars， as well as safety switches that close the lifting platform circuit when the door is open. Extremely generous and warning lights or bells for the operation of the lifting platform， operators can operate in multiple layers jog or safe mode.
YuanbaoWorking on an aluminum alloy elevator workbench. Must wear safety belts， and other tools to prevent accidents.
Three masts aluminum alloy elevator: The main structure is made of high-quality high-strength aluminum profiles helmets， with super large load capacity and working stability. The overall lifting guardrail device has good strength， greatly reducing the overall height during transportation， and making loading and unloading convenient. This machine has strong load-bearing capacity and is suitable for - people to climb heights simultaneously.
The hydraulic aluminum alloy elevator is widely used in various industrial enterprises and production lines such as automobile， container， mold manufacturing， wood processing， chemical filling， etc.， to meet the lifting requirements of different operation heights. At the same time， it can be equipped with various table forms (such as ball， roller， turntable， turning，YuanbaoFour column aluminum alloy hydraulic lifting platform， tipping， and with various ways (transfer， explosion-proof)， it has stable and accurate lifting， frequent starting The characteristics of large load capacity effectively solve various lifting and lowering difficulties in industrial enterprises， making production operations smooth. The hydraulic lifting platform mainly uses hydraulic oil pressure transmission to achieve the lifting function. Its shear fork mechanical structure ensures high stability of the aluminum alloy elevator， making the high-altitude work range larger and suitable for multiple people to work simultaneously. It makes high-altitude operations more efficient and safer.