Dengqiao Bridge is divided into two forms of mobile boarding bridge and fixed Deng Laqiao. The application scope of the application scope of fixed Dengqiaoqiao and using a mobile boarding bridge: Used for on -site unloading platform or needed Place of flow loading and unloading goods. If there is no loading and unloading platform at the logistics site as a remedy measure，St.PetersburgAutomatic hydraulic lifting platform， the mobile boarding bridge is a very suitable solution. The mobile boarding bridge is equivalent to a mobile steel knot slope. Essence It only needs to be operated by a single person， and it can achieve the rapid loading and unloading of the goods without power power.
The base of the lifting platform， each lifting platform is availableThere are multiple floors of interaction， so the safety factor of the rail -type hydraulic lifting platform is still very high， which is much higher than that of ordinary platforms.
St.PetersburgOf course， the hydraulic lifting platform uses a dual protection structure， which can make the work relatively safer. When lifting， an appropriate working surface can be selected， so that the lifting platform will be safer during operation. The process of operating the hydraulic lifting platform should be standardized， so that maintenance and debugging can be carried out before leaving the factory. At the same time it can also ensure that all technical indicators can meet the design requirements， but it is necessary to connect the ground wire during use. Of course， the hydraulic electrical system does not need to be adjusted in this situation.
Regularly check the connection of each ministry. If there is a loose， it should be tightened. The connection bolt of this machine must check that all the connecting axes must be opened for all connecting shafts when compressed by the body， and they need to be sufficient.
Doha Now you understand how to use a hydraulic lift. It provides us with a safe working environment to improve the efficiency and quality of the surrender.
Because the hydraulic lifting platform power unit requires oil sources， the structure is relatively complicated， and it also has certain pollution and influence on the environment. The movement device is relatively fast. The structure of the electric rod is very simple， and the space occupies is small， but there is no advantage in price， so the power supply will be used as the power source of the lifting machine. The DC motor is directly transmitted to other mechanical devices through the reduction of the reducer.
In the process of manufacturing， there are many types of materials that manufacturers can use in the process of manufacturing， in addition to improving sales and quality， the use of advanced processes can also improve daily production efficiency for manufacturers.
At present， if any product is good in the market， it needs to occupy more advantages in many aspects， so as to achieve a fierce market competition. The same is true for electric lifting platforms， but after entering the market， this type of lifting equipment has been very good. And these have a lot to do with some of its special features in design.
Structural function: The scissor type hydraulic elevator structure adopts high-strength manganese steel alloy giant tubes. Equipped with safety protection devices to prevent overloading of the elevator. Equipped with a safety protection valve to prevent hydraulic pipeline rupture. Equipped with an emergency descent device in case of power outage. This product is suitable for mobile high-altitude operations such as installation and maintenance of high-altitude equipment in various industries. According to different requirements， we can choose different forms of power supply (three-phase AC power supply， DC power supply， and internal combustion engine power supply， etc.)， equipped with manual hydraulic devices， which can be used for normal lifting and lowering in places with power outages or no power supply. Expansion platforms can also be added，St.PetersburgMobile hydraulic lifting platform， which is an ideal product for modern high-rise buildings and equipment and a necessity for high-altitude safe and civilized production.
If there are problems inside the elevator， and there are electrical professional staff presents， any component of the hydraulic system should be carried out when disassembling any components of the hydraulic system， and maintenance should be carried out under the condition of thoroughly discharge.
market priceFailure exclusion: When the elevator power supply light is turned on， press the lifting button， the motor rotates， and the lifting platform does not rise. This may be the reversal of the motor after the three -phase power supply is connected. Just change the two -phase line of the heavy machine.
The power unit is adjusted， whether it is a fork -cut lifting platform or a rail -type lifting cargo ladder it is from the power unit and the oil cylinder. The power unit has four holes during production. In the hydraulic oil flow， we can adjust the motor speed or electric hydraulic ratio valve to adjust the hydraulic oil flow; which factors will affect the lift speed oil pipe of the hydraulic lift. The longer the hydraulic oil pipe， the longer the upsurge. Therefore， during installation， the length of the oil pipe should be reduced as much as possible within the allowable range of the design; on the basis of adjusting the power unit， the size of the oil pipe can also be adjusted. On the premise of ensuring that the equipment meets normal demand， correspondingly can perform correspondingly Adjustment.
In short， when using a fixed loading platform， basically do not need to worry about stability. Because the manufacturer has taken a lot of measures on this area， there are more affordables provided， so many times you can rest assured that you can rest assured use.
After ， hours of working， the mechanical and electrical system is repaired.
agentAfter ， hours of lifts， repair machinery and electrical systems.
Hydraulic elevator is a lifting mechanical equipment composed of walking mechanism hydraulic mechanism， electric mechanism， and support mechanism. The hydraulic oil is formed by a vane pump to a certain pressure， and the oil filter， explosion-proof electromagnetic directional valve， throttle valve， and balance valve enter the lower end of the cylinder， causing the cylinder to move upwards and increase the weight. The return oil explosion-proof electromagnetic directional valve at the upper end of the cylinder returns to the cylinder， and its rated pressure overflow valve is adjusted. The pressure gauge observes the reading value of the pressure gauge.
Regardless of which type of lifting platform is used， people are more concerned about the stability in the process of use. Because the quality of stability will not only affect the actual use effect， many times the safety of the use will also have to varying degrees of effects， so it is very necessary to pay attention to it. The same is true when using a fixed loading platform， any abnormal phenomenon should be stopped immediately， the lifting machine customer service staff should be explained to explain the abnormal situation of the lifting machine， cooperate with the inspection lift， and solve the abnormal situation as soon as possible， and then the lifting machine can be restarted and re -to be carried out again. Work. Under the abnormal situation of lifts， forcibly work is not allowed， you can stop emerging， so you must carefully check whether the items are normal before use. Effectiveness.
The hydraulic oil of various parts such as the reducer the gearbox， the external rodent and other parts are performed according to the requirements in the table.