The wall bracket of the construction electric elevator should be intact and reliably fixed，BalmazuvarosBrasilia， and its attachment distance， wall bracket spacing， and end height must comply with the requirements of the "User Manual". The angle between the plane of the wall bracket and the normal direction of the attachment surface should not exceed degrees;. When the attachment device does not meet the requirements of the "User Manual" due to conditions， its calculation sheet， design， and production materials should be confirmed by the manufacturer or reviewed by the technical leader of the installation unit， and verified by experts.
The pump body adopts an integrated pump station，BalmazuvarosQigaiqi， all equipped with imported high-quality pump stations， which can also be selected according to customer requirements to meet customer ideal requirements.
BalmazuvarosThere is a certain itinerary.
When the door is closed， except for the gap between the lower part of the door that should not exceed mm， any through-hole and opening size related to the distance between any door and adjacent moving parts， as well as the gap around the door or the gap between parts， should comply with the provisions of Table of GB -.
continueFrom the perspective of the safety performance of the machinery itself， those that have undergone national safety certification will not have significant safety issues. The main problem is that after using the electric elevator for a period of time， mechanical components may fall off or be damaged due to various factors. This problem depends on regular inspection and maintenance of the machinery
To meet the needs of stage craftsmanship and layout; Product; In the music and dance theater stage arranged in a zigzag pattern auxiliary lifting platforms are often arranged in front， back， and right of the main stage lifting platform. The side and rear auxiliary lifting platforms are used for the smooth opening of the side platform and rear vehicle turntable， so that the entire platform does not have a height difference， ensuring the safety of the cast members.
The verticality of the guide rail frame should meet the requirements of the specifications.
Safety performance: Electric elevators not only have the safety device of traditional traction elevators， but also have an overflow valve to prevent excessive system pressure during upward movement
Platform.
The scissor type electric elevator is a widely used high-altitude operation special equipment. Its scissor mechanical structure ensures high stability of the lifting platform， wide working platform， and high bearing capacity， making the high-altitude operation range wider and suitable for multiple people to work simultaneously. It makes high-altitude operation more efficient and safer
Sampling inspectionThe wall bracket of the construction electric elevator should be intact and reliably fixed， and its attachment distance， wall bracket spacing， and end height must comply with the requirements of the "User Manual". The angle between the plane of the wall bracket and the normal direction of the attachment surface should not exceed degrees;. When the attachment device does not meet the requirements of the "User Manual" due to conditions its calculation sheet， design， and production materials should be confirmed by the manufacturer or reviewed by the technical leader of the installation unit， and verified by experts.
Tank oil temperature protection: When the oil temperature in the tank exceeds the standard setting value， the oil temperature protection device sends a signal to suspend the use of the elevator. The elevator can only be started when the oil temperature drops
Drainage measures need to be considered around the foundation. (Drain the accumulated water on the foundation).
Monthly maintenance and inspection of hydraulic lifting platform rollers， intermediate shafts and bearings， oil cylinder pin shafts and bearings，BalmazuvarosCastor bean， boom hinge shafts and bearings for wear. Add some oil to each part to extend the service life of the lifting platform bearings. The quality and level of hydraulic oil. The lifting platform should be raised throughout the entire process， and at this position， the hydraulic ground should be - millimeters higher than the bottom of the box. If the hydraulic oil becomes dark， sticky， or has foreign objects such as gravel， it should be replaced in a timely manner ( # hydraulic oil). Annual maintenance and inspection of all hydraulic pipelines and joints of the lifting platform. The pipeline must not be damaged， and the joints must not be loose. All joints must be tightened. Remove and disassemble the lowering valve of the lifting platform， blow out the plunger with compressed air， then install it and reinstall it. Drain and discard the hydraulic oil， tighten the joint， remove the oil filter， clean it with compressed air and then return it to the oil tank and connect the pipeline.
Highly recommendedBefore installation， the installation unit should confirm that the foundation， foundation bearing capacity， embedded parts， and foundation drainage measures of the installed construction electric elevator and auxiliary heavy equipment comply with the requirements of the special construction plan for the installation and dismantling of the construction electric elevator based on the construction electric elevator foundation acceptance form， concealed engineering acceptance form， and concrete strength report.
Degrees， m/s.
The hydraulic oil enters the upper end of the hydraulic cylinder through the explosion-proof electromagnetic directional valve， and the return oil from the lower end of the hydraulic cylinder returns to the oil tank through the balance valve， throttle valve， and explosion-proof electromagnetic directional valve. To ensure a smooth descent of heavy objects and safe and reliable braking， so that the descent speed does not change due to heavy objects. The throttle valve regulates the flow rate and the ascending and descending speed.
BalmazuvarosThe connection method and angle between the wall bracket and the building structure should comply with the requirements of the user manual.
When a rigid mm square or circular flat surface is applied with a normal force of N to either side of the door the door may not meet the above requirements， but safety should be maintained.
When the distance between the outer edge of the construction electric elevator and the edge line of the external overhead power line cannot meet the requirements in the table above， effective protective measures should be taken.