Civil engineering advantages: The pit depth of the guide rail type lifting platform is generally around -mm， and the top layer is not affected. It can be customized according to the location and environment.
Drainage measures need to be considered around the foundation. (Drain the accumulated water on the foundation).
ValpalotaNormal operation starts. Click on this free download of construction technical information. Safety limit devices should be installed on electric elevators for construction，ValpalotaShi Qiuqing， with upper and lower limit switches that are sensitive and reliable.
The advantages and disadvantages of several commonly used electric lifting mechanisms are as follows: hydraulic electric lifting mechanisms: using hydraulic technology， smooth lifting and low noise.
Ha TianSteel wire ropes， pulleys， and counterweight steel wire ropes shall comply with the following regulations: the characteristics of steel wire ropes shall comply with the requirements of General Purpose Steel Wire Ropes GB/T; Maintenance， wear， deformation， and corrosion of steel wire ropes
Setting requirements: The guide rail should be rigid and flexible components such as wire ropes or chains should not be used.
Spiral electric lifting mechanism: With all the functions of a regular lifting platform， the main feature is that the equipment occupies a small foundation pit and has a large stroke. The equipment has a height of only -mm and a travel distance of up to m. It is particularly suitable for buildings with stages built on two or more floors due to space constraints.
The angle between the wall bracket and the horizontal plane should comply with the requirements of the user manual.
The isolation and buffering rubber in various parts of the aluminum alloy electric elevator drive device are intact and tightly fitted.
Construction electric elevators outside the lightning protection range
How much does it cost?Setting requirements: Before starting work every day and changing shifts， the driver of the construction electric elevator should inspect the construction electric elevator according to the requirements of the user manual and specifications record the inspection results， and report any problems found to the user unit.
Protective measures should comply with regulatory requirements.
It is reported that a fixed electric elevator has good lifting stability and can only be used for fixed operations， making high-altitude operations easier
The quality of the standard section should comply with the product manual and specification requirements.
High quality and low priceThe list of materials for making landing doors is as follows: Table : List of materials for making landing doors. Landing doors should be installed at the entrance of each landing station， and the landing doors should function properly.
The stopper bearing of the mechanism is kept intact.
Monthly maintenance and inspection of hydraulic lifting platform rollers， intermediate shafts and bearings， oil cylinder pin shafts and bearings， boom hinge shafts and bearings for wear. Add some oil to each part to extend the service life of the lifting platform bearings. The quality and level of hydraulic oil. The lifting platform should be raised throughout the entire process， and at this position， sticky， or has foreign objects such as gravel，ValpalotaWeiwozrawek， it should be replaced in a timely manner ( # hydraulic oil). Annual maintenance and inspection of all hydraulic pipelines and joints of the lifting platform. The pipeline must not be damaged， and the joints must not be loose. All joints must be tightened. Remove and disassemble the lowering valve of the lifting platform blow out the plunger with compressed air， tighten the joint， remove the oil filter， clean it with compressed air， and then return it to the oil tank and connect the pipeline.
ValpalotaThe setting of the cable guide frame should comply with the user manual and regulatory requirements.
When the horizontal distance between the edge of the cage and the edge of the landing or between the cage and the landing door is greater than mm and there is no effective protection from other structures， the side protection device for the landing entrance should be equipped.
The quality of the standard section should comply with the product manual and specification requirements.