There is no need to set up a computer room above the shaft like an elevator， and the top floor height can be installed at least . meters.
Construction electric elevators outside the lightning protection range
Los Angeles International AirportPrecautions during operation: Mechanical operations should be gentle and smooth， and mechanical operations should be avoided， otherwise impact loads will inevitably occur， causing frequent mechanical failures and greatly shortening the service life. Generated during homework
The hydraulic oil forms a certain pressure by the vane pump and enters the lower end of the hydraulic cylinder through an oil filter， explosion-proof electromagnetic directional valve，Los Angeles International AirportMiskoltz， throttle valve， hydraulic control one-way valve， and balance valve， causing the hydraulic cylinder to move upwards and lift heavy objects. The return oil at the upper end of the hydraulic cylinder returns to the oil tank through the explosion-proof electromagnetic directional valve， and its rated pressure overflow valve is adjusted. The pressure gauge observes the reading value on the pressure gauge. The downward movement of the hydraulic cylinder (i.e. lowering of heavy objects).
LoyoWhen the horizontal distance between the edge of the cage and the edge of the landing or between the cage and the landing door is greater than mm and there is no effective protection from other structures， the side protection device for the landing entrance should be equipped.
When the foundation is set on the roof or floor structure，Los Angeles International Airportmalpensa airport ， the bearing capacity of its supporting structure should be checked.
The bearing capacity of the ground under the concrete foundation plate should be greater than .Mpa.
Emergency manual valve: In case of power failure， the upper small safety distance L should meet the following requirements: L=+.V after the upper limit switch is triggered by the hanging cage， where L is the upper safety distance; V: Increase speed
Setting requirements: The foundation and foundation of the construction electric elevator should meet the requirements of the user manual. Before installing the construction electric elevator， the foundation should be inspected and accepted according to the requirements of the specifications. Only after passing the inspection can the installation be carried out.
For more， please checkSteel wire ropes， pulleys， and counterweight steel wire ropes shall comply with the following regulations: the characteristics of steel wire ropes shall comply with the requirements of General Purpose Steel Wire Ropes GB/T; Maintenance， wear， deformation， and corrosion of steel wire ropes
The landing door should meet the requirements of the specifications and achieve standardization.
A complete lifting platform accessory can be selected and customized according to different places， venues， and environmental usage conditions. Meet the needs of different users. So why lifting platforms can be used and installed in so many industries and places is because they can achieve multi-purpose， demonstrate multifunctional， meet various different needs， and win market demand. In modern industrial transportation processes，Los Angeles International AirportKorma， whether in airports， docks warehouses， floors， workshops and other places that require rapid loading and unloading of goods， they have played a very practical value， It has also brought great contributions to the entire industry and even the entire economic development. However， long-term operation and use of these devices inevitably lead to wear and consumption， and regular maintenance and upkeep are essential. Otherwise， both work efficiency and utilization rate will decrease， and at that time， the gains and losses will outweigh the losses.
When the wall bracket cannot meet the requirements of the construction site， it should be designed and calculated separately.
new productTo ensure safe and reliable braking of the lifting platform and prevent accidents， a hydraulic control one-way valve， is added to ensure safe self-locking in the event of an accidental rupture of the hydraulic pipeline. An overload sound control alarm has been installed to distinguish between overload or equipment failure. Electrical system explosion-proof button SB&flash; The rotation of the SB motor and the commutation of the explosion-proof electromagnetic directional valve are used to maintain load increase or decrease， and; Program adjustment time delay to avoid frequent movement of electric elevators that may affect their service life.
A lifting platform with specifications ranging in height from meter to meters.
Later， when there is a major malfunction of the lifting platform， it should be repaired by professional personnel as soon as possible. After the malfunction occurs， it should not be used again to avoid accidents， personnel and property losses.
Los Angeles International AirportThe entrance of each landing platform must be equipped with a landing door， which must open towards the landing platform side， and the door bolt must be set on the side next to the construction electric elevator.
Installation and dismantling personnel and drivers should hold certificates to work.
The quality of the standard section should comply with the product manual and specification requirements.