In the construction elevator， the switch box also has leakage protection equipment. Its wires and cables are well insulated， without leakage， and the metal threaded is not rusted， and its damage is close to zero. His steel wire rope should comply with the corresponding configuration requirements， and there is no problem of broken strands and diameter reduction. Of course， the number of broken wires should not exceed the corresponding standard. His pulley movement is very flexible.
Winnie snowPower unit adjustment， whether it is a scissor lift platform or a rail-type lift， is controlled by the power unit and the oil cylinder. The power unit is equipped with four outlet holes during production， which can be adjusted in size to increase or decrease the oil cylinder. Hydraulic oil flow we can adjust the motor speed or the electro-hydraulic proportional valve to adjust the hydraulic oil flow; what factors will affect the lifting speed of the hydraulic lift oil pipe， the longer the hydraulic oil pipe， the longer the rise time. Therefore， during installation， the length of the oil pipe should be reduced as much as possible within the allowable range of the design; on the basis of adjusting the power unit， the size of the oil pipeline can also be adjusted， and on the premise of ensuring that the equipment meets the normal requirements and safety corresponding adjustment.
Conscientiously write the special construction plan for installation and construction， and make safety technical disclosures to the installers.
Bugiri DistrictGoods should be stacked on the platform and not tilted. When the freight elevator goes up and down beyond the range of the platform， no one should stand around to watch.
Today， the editor will talk about a series of safety devices and their uses on the guide rail hydraulic lifting platform.
The parts such as reduction box， gearbox， external gear and hydraulic oil are all in accordance with the requirements in the table.
Regular maintenance Regularly check whether the circuit system of the hydraulic lifting platform is loose， and check whether the wires and cables are aging and damaged， which may cause leakage of the line. If there is， it should be repaired in time to avoid electric shock.
Hydraulic lifting freight elevator， cargo elevator， is mainly designed for transporting goods， usually accompanied by people. The freight elevator car has the characteristics of long and narrow. A vertical lift powered by an electric motor，Winnie snowTwo ton guide rail type cargo elevator， the motor still runs with full load， and the current flowing through the stator winding will exceed the rated current， and even cause the motor to stop by itself. If it overheats， it will burn out. When the star-connected motor is wrongly connected into a triangle or the motor with several coil groups connected in series to form a branch circuit is connected in parallel with two branches， and in severe cases， the winding will be burned.
Excellent serviceOutriggers: mechanical outriggers， hydraulic outriggers， ordinary hand-operated outriggers， pull-out outriggers.
It is strictly forbidden for personnel to take the freight elevator to go up and down floors and climb.
What is the new price of a fixed lift? Professionally improve the quality assurance of the freight elevator factory. The preferential activities are in progress， and new and old customers are welcome to come to consult.
As for the guide rail elevator installed outdoors， it is often exposed to rain and sunlight， so special attention should be paid to regular maintenance and inspection to avoid accidents.
Manufacturing costWhen installing， dismantling and adjusting the slewing mechanism， care should be taken to ensure that the centerline of the slewing mechanism reducer is parallel to the centerline of the gear， the meshing surface is not less than %， and the meshing clearance is suitable.
When in use， the four outriggers should be firmly supported on a solid ground (based on the fact that the walking wheels are about to leave the ground). If necessary， sleepers can be used.
Goods should be stacked on the platform and not tilted. When the freight elevator goes up and down beyond the range of the platform， no one should stand around to watch.
Winnie snowNowadays，Winnie snowWarehouse elevator， small and medium-sized enterprises are holding products with the idea of good quality and favorable price.
The design of the hydraulic lifting platform is unreasonable. When the designer designs the cylinder barrel and rod， if there is a problem with the design size and angle， it is necessary to confirm the technical strength of the manufacturer when working on a hydraulic lifting platform; what is the problem with the sound of the oil cylinder of the hydraulic lifting platform? Design drawings to make， the angle of the oil cylinder is slightly deviated， it will cause the friction between the cylinder barrel and the rod， which will cause the sound; the seal quality of the hydraulic lifting platform is different and the use of different seals will also affect the sound of the oil cylinder， and the seal with excellent material The continuous friction between the parts and the cylinder wall will cause the sound to be very loud， and long-term wear and tear may scratch the oil cylinder and cause oil leakage， so when the hydraulic lifting platform is used， pay attention to ask the manufacturer what brand and material the seal is used; In some cases of mechanical running-in， it is not ruled out that the above three situations are normal， and there will still be noises. If there is no problem after investigation， then don’t worry. It’s just a running-in problem between mechanical parts. It will disappear naturally.
Are the water cooling and air cooling of the hydraulic station the same?
