Chain type electric lifting mechanism: With a good guiding mechanism， it can ensure that the equipment does not tilt during operation. Gear and rack electric lifting mechanism: precise transmission and high cost.
News Abstract: The development of the lifting platform industry will continue to grow in recent years! With the continuous development of electric lifting machinery for high-altitude operations in recent years the products of electric lifting platform vehicles have been continuously improved， and various new technologies and materials have emerged， making the further development of lifting platform vehicles possible.
LangfangIn addition， when adding hydraulic oil， it is necessary to ensure the quality of the hydraulic oil， as some hydraulic oil manufacturers will choose hydraulic oil with poor quality. Hydraulic oil such as hydraulic lifting platforms not only cannot have any effect on folding arm elevators， but also affects the working efficiency of folding arm electric elevators due to deterioration issues.
There is no need to set up a computer room above the shaft like an elevator， and the top floor height can be installed at least . meters.
TurkyuThe foundation base or embedded parts should be fully embedded in the concrete foundation plate.
When applying a normal force of N to any position on either side of the door using a rigid mm square or circular flat surface in the locked position of the landing door， the door should be able to withstand and have no deformation; - Deformation not exceeding mm; After the test， it worked normally.
The scissor type electric elevator is a widely used high-altitude operation special equipment. Its scissor mechanical structure ensures high stability of the lifting platform，LangfangSubminiature electric elevator， wide working platform，LangfangMicro electric elevator， and high bearing capacity， it will take on the function of raising or lowering. In order to prevent the lift car from crashing or sinking， stage equipment should be dismantled with over travel switches that can cut off power and cannot be automatically reset， and installed in the machine room， but also have an overflow valve to prevent excessive system pressure during upward movement
superior qualityIt is understood that the scissor type lifting platform is a widely used specialized equipment for high-altitude operations. Its shear fork mechanical structure provides high stability for the lifting platform， and high load-bearing capacity， making the range of high-altitude operations larger and suitable for multiple people working simultaneously. The lifting power is divided into V， V or V power supplies， diesel engines， using Italian and domestic hydraulic pump stations， and the table top is equipped with anti slip insulation buckle plates， which have anti slip， insulation， and safety features. Please rest assured to use.
The bearing capacity of the building structure at the attachment point of the wall bracket should meet the requirements specified in the user manual for construction electric elevators.
When the door is closed， except for the gap between the lower part of the door that should not exceed mm， any through-hole and opening size related to the distance between any door and adjacent moving parts， as well as the gap around the door or the gap between parts， should comply with the provisions of Table of GB -.
Speed limit wire rope switch. When the speed limit wire rope trips or breaks. Make the electric elevator unable to start.
Pursuit of excellenceThe list of materials for making landing doors is as follows: Table : List of materials for making landing doors. Landing doors should be installed at the entrance of each landing station， and the landing doors should function properly.
The usual operation of landing and docking.
Low power consumption: When the hydraulic guide rail lifting platform descends， it is driven by the pressure generated by its own weight， greatly saving energy and reducing consumption.
LangfangThe oil cylinder and sealing components are made of imported components to solve the problem of unstable oil pressure and oil leakage of components for customers.
Buffer. In order to increase the energy for the car to hit the top or sink to the bottom. Remove rubber or sponge from the buffer and cabin to increase their impact energy; Rope groove slipping and other accidents caused the car to suddenly fall resulting in a safety clamp. To prevent breakage of the lifting wire rope. A safety clamp that can simultaneously cut off the power supply and stop the car from falling should be removed from the car. A car without safety tongs is not allowed to ride or carry people. If it is a simple electric elevator， there should be a safety device (such as a safety stop pin) to prevent people from suddenly falling when loading and unloading goods in the car; Electric elevators with three or more floors (including three floors) for passengers or passengers.
Setting requirements: For construction electric elevators that operate in multiple shifts， the handover system should be implemented， and drivers should fill out the handover record form according to the standard requirements. The driver should conduct a pre shift inspection and confirm that there are no errors before starting the machine for operation.
