Secondly， the lifting platform is driven by electrical energy and lifted by the hydraulic system. During operation， it is necessary to avoid irregular operations. To ensure the normal and orderly operation of the lifting platform and achieve the ideal unloading level， timely inspection of various functions is essential.
The scissor type electric elevator is a widely used high-altitude operation special equipment. Its scissor mechanical structure ensures high stability of the lifting platform wide working platform，Avery on the SeineElectric hydraulic elevator， and high bearing capacity， making the high-altitude operation range wider and suitable for multiple people to work simultaneously. It makes high-altitude operation more efficient and safer
Avery on the SeineThe cleanliness of the hydraulic station is an important aspect of the electric elevator hydraulic station， so it should not be taken lightly. And from a professional perspective， there are relevant rules and requirements that should be referred to in the specification manual， so as to have a correct understanding and know how to achieve good cleanliness.
When the foundation is set on the roof or floor structure， the bearing capacity of its supporting structure should be checked.
DalahuSetting requirements: The landing door should be standardized and tooled.
Horizontal lead screw mechanical electricity
The foundation production and acceptance of electric elevators for foundation construction should comply with the user manual and regulatory requirements.
When the wall bracket cannot meet the requirements of the construction site， it should be designed and calculated separately.
Before each shift of work， the safety devices of the construction electric elevator should be inspected to ensure sensitivity and reliability.
The foundation base or embedded parts should be fully embedded in the concrete foundation plate.
detailsThe entrance of each landing platform must be equipped with a landing door，Avery on the SeineElectric pillar elevator， which must open towards the landing platform side，Avery on the SeineElectric elevator small， and the door bolt must be set on the side next to the construction electric elevator.
When the door is closed， except for the gap between the lower part of the door that should not exceed mm， any through-hole and opening size related to the distance between any door and adjacent moving parts， as well as the gap around the door or the gap between parts， should comply with the provisions of Table of GB -.
The landing door should meet the requirements of the specifications and achieve standardization.
Human improper operation is the main factor causing malfunctions in scissor type electric elevators. When stacking goods， which is better than stacking them in the center of the cargo stacking area of the cargo elevator to avoid imbalance between the two ends of the stacking area. Eventually， during the operation of the electric elevator， it may cause the electric elevator to lose balance. After the goods are stacked completely， ropes should be used to lock the goods， so that they are not afraid of the goods during the lifting process; Careless; Scattered down
middlemanEspecially suitable for steel structured factories， suitable for both indoor and outdoor installation.
Correct use can also greatly improve work efficiency. So how should it be used?
Setting requirements: Before starting work every day and changing shifts， the driver of the construction electric elevator should inspect the construction electric elevator according to the requirements of the user manual and specifications， record the inspection results， and report any problems found to the user unit.
Avery on the SeineThe spacing between wall brackets and the height of guide rails above the high attachment point should comply with the requirements of the user manual.
When applying a normal force of N to any position on either side of the door using a rigid mm square or circular flat surface in the locked position of the landing door， the door should be able to withstand and have no deformation; - Deformation not exceeding mm; After the test， which must open towards the landing platform side and the door bolt must be set on the side next to the construction electric elevator.
