Setting requirements: The quality of the standard section should meet the requirements of the product manual. Before installing the construction electric elevator， all components should be inspected and standard sections and other components with severe wear and deformation should be replaced.
The safety notice board for construction electric elevators should be prominently placed on the hanging cage for the rated load capacity and rated number of passengers of the construction electric elevator. It is strictly prohibited to use construction electric elevators beyond the rated load capacity or rated number of passengers.
KartanisetaThe detailed reason why water cannot be used to flush the hydraulic station is that doing so will corrode the oil tank in the hydraulic station， and once water is mixed in the hydraulic station， the damage to the hydraulic system is very large. Therefore，Kartaniseta200 kg portable electric elevator， it will simply form pipeline corrosion， water vaporization， and other phenomena that can cause adverse effects or results for hydraulic electric elevators. Therefore， it is necessary to prevent such actions to ensure the normal operation and service life of the hydraulic station.
The list of materials for making landing doors is as follows: Table : List of materials for making landing doors. Landing doors should be installed at the entrance of each landing station， and the landing doors should function properly.
EsmeraldaThe foundation base or embedded parts should be fully embedded in the concrete foundation plate.
Braking. The brake limit switch for partial motion control of the electric hoist traction machine. Assembly that restricts the operation of the lift car when it is opened to a high or low position; If the limit switch controls the overtravel switch. When the car travels to a high or low position， it will take on the function of raising or lowering. In order to prevent the lift car from crashing or sinking， stage equipment should be dismantled with over travel switches that can cut off power and cannot be automatically reset， and installed in the machine room， rather than in the shaft; A buffer should be installed that can absorb the energy of the moving mechanism and reduce impact.
Spiral electric lifting mechanism: With all the functions of a regular lifting platform， the main feature is that the equipment occupies a small foundation pit and has a large stroke. The equipment has a height of only -mm and a travel distance of up to m. It is particularly suitable for buildings with stages built on two or more floors due to space constraints.
Emergency manual valve: In case of power failure， it can cause the car to descend to the nearest floor position and open the door
Safety devices: Electric elevators for construction should be equipped with overload detection devices. When the load inside the cage exceeds % of the rated load capacity， the overload detection device will give a warning signal inside the cage， wide working platform， making the high-altitude operation range wider and suitable for multiple people to work simultaneously. It makes high-altitude operation more efficient and safer
The counterweight guide rail should meet the specification requirements.
The end height of the guide rail frame above the high attachment point should comply with the provisions of the user manual.
Acceptance: Concrete strength grade C， the guide rail hydraulic lifting platform is superior in terms of product， civil engineering and operating costs. The editor of the electric elevator will provide a detailed analysis: the advantages of the product are that the equipment bears a large load， can achieve multiple points， and can be controlled up and down floors to achieve safe use.
Aluminum alloy lifting platforms can be divided into single column aluminum alloy， cargo elevator， double column aluminum alloy， three column and four column aluminum alloy. Can be used in factories， automated warehouses， parking lots municipal facilities， docks， buildings，KartanisetaRechargeable electric elevator， and installations
The landing door should be in a normally closed state. Without the permission of the construction electric elevator driver， the landing door shall not be opened.
KartanisetaInstallation verticality deviation guide rail frame erection height，KartanisetaSmall electric elevator， h/mH≤ H& gt; verticality deviation/mm≤ (/h≤ ≤ ≤ ≤ pairs of steel wire rope construction electric elevators， the verticality deviation of the guide rail frame should not exceed (/) h.
Secondly， the lifting platform is driven by electrical energy and lifted by the hydraulic system. During operation， it is necessary to avoid irregular operations. To ensure the normal and orderly operation of the lifting platform and achieve the ideal unloading level， timely inspection of various functions is essential.
Monthly maintenance and inspection of hydraulic lifting platform rollers， intermediate shafts and bearings， oil cylinder pin shafts and bearings， boom hinge shafts and bearings for wear. Add some oil to each part to extend the service life of the lifting platform bearings. The quality and level of hydraulic oil. The lifting platform should be raised throughout the entire process， and at this position， the hydraulic ground should be - millimeters higher than the bottom of the box. If the hydraulic oil becomes dark， sticky， or has foreign objects such as gravel， it should be replaced in a timely manner ( # hydraulic oil). Annual maintenance and inspection of all hydraulic pipelines and joints of the lifting platform. The pipeline must not be damaged， and the joints must not be loose. All joints must be tightened. Remove and disassemble the lowering valve of the lifting platform， blow out the plunger with compressed air， then install it and reinstall it. Drain and discard the hydraulic oil， tighten the joint， remove the oil filter， clean it with compressed air， and then return it to the oil tank and connect the pipeline.
